Sensing method
Model |
Through-beam |
|
F3W-E032A6/A8 |
F3W-E032B6/B8 |
|
Sensing distance |
30 to 300 mm |
|
Beam gap |
25 mm |
|
Number of beams |
3 |
|
Sensing width |
50 mm |
|
Standard sensing object |
Opaque, 28-mm dia. min. |
Light source
(emission wavelength) |
Infrared LED (860 nm) |
|
Power supply voltage |
12 to 24 VDC ±10% (ripple (p-p): 10% max.) |
|
Current consumption |
Emitter: 40 mA max., Receiver: 40 mA max. |
|
Control output |
NPN or PNP open collector output
Load power supply: 30 VDC, Load current: 100 mA max. (Residual voltage: 1.8 V max.)
Dark-ON or Light-ON (selectable) |
|
Picking instruction indicator input |
Relay or open collector input
NPN input
Indicator ON: Input voltage of 0 to 2 V
Indicator OFF: Open (with leakage current of 0.1 mA max.)
PNP input Indicator ON: Input voltage: (+DC - 2 V) to +DC (See note.) Indicator OFF: Open (with leakage current of 0.1 mA max.)
|
|
Emission stop input |
Relay or open collector input
NPN input
Emission stop input voltage: 0 to 2 V
Emission input voltage: Open (with leakage current of 0.1 mA max.)
PNP input
Emission stop input voltage: (+DC - 2 V) to +DC (See note.)
Emission input voltage: Open (with leakage current of 0.1 mA max.) |
|
Protection circuits |
Reverse-connection protection, output short protection, and mutual interference prevention function (set with frequency switch) |
|
Response time |
Operate/Release: 100 ms max. |
|
Indicators |
Receiver |
Operation indicator (orange), stability indicator (green), and picking indicators (orange) |
|
Emitter |
Power indicator (green), emission stop indicator (orange), and picking indicators (orange) |
|
Ambient temperature |
Operating: - 10 to 55 ° C
Storage: - 25 to 70 ° C (with no icing or condensation) |
|
Ambient humidity |
Operating/storage: 35% to 85% (with no condensation) |
|
Ambient light level |
Sunlight: 10,000 lx at light-receiving surface, Incandescent light: 3,000 lx at light-receiving surface |
|
Insulation resistance |
20 M Ω min. (at 500 VDC) |
|
Dielectric strength |
1,000 VAC, 50/60 Hz for 1 min |
|
Vibration resistance |
Destruction: 10 to 50 Hz, 1.5-mm double-amplitude for 2 hours each in X, Y, and Z directions |
|
Shock resistance |
Destruction: 500 m/s2, 3 times in X, Y, and Z directions |
|
Degree of protection |
IP6 2 (IEC60529) |
|
Connection method |
Pre-wired Standard cable length: 2 m |
Pre-wired connector
Standard cable length: 0.3 m
(M12, 4-pin connector) |
|
Weight (packed state) |
Approx. 125 g |
Approx. 85 g |
|
Materials |
Case |
ABS resin |
|
|
Lens |
Acrylic resin |
|
|
Cable |
Oil-resistant PVC |
|
Accessories |
Instruction manual |
